MTX Audio TX2 Series 6.5" Component Speakers - TX265S
The MTX TX265S speakers shine with flawless construction, cutting-edge design, first-rate sound quality and very good power handling. The brushed and electroplated injected polypropylene membrane reveals laser-cut logos. An aluminium bullet phase-plug placed in the centre of the woofer effectively eliminates standing waves. The ultra rigid chassis and the large magnetic system provide very good bass reproduction. The separate Ø25mm tweeter uses a neodymium magnet and an exceptionally dynamic silk dome. The filter is in-line for easy installation. The price is ultra competitive and nothing in the market comes anywhere close to the TX2 Series in terms of price to performance.
Features :
- Injected polypropylene cone with brushed electro-plated finish for a perfect design
- 25mm (1“) neodymium silk dome tweeter Aluminium phase plug to erase the standing waves
- Laser cut logos for a perfect finish
- 25mm aluminium voice coil for a higher power handling
- Rubber suspension for a perfect reliability
- Soft and highly musical sound quality
Specifications
- 2-way separate speakers
- Woofer diameter : 16,5cm (6.5“)
- Tweeter diameter : 25mm (1") silk dome
- Peak Power : 260W
- RMS Power : 65W
- Sensitivity : 92.5dB/2,83v/1m
- Impedance : 4Ω
- Response : 48Hz - 25000Hz
- Mounting Depth : 62.5MM
- Grilles included
Download product manual here
MTX Audio TX2 Series 6.5" Coaxial Speakers - TX265C
The MTX TX265C speakers shine with flawless construction, cutting-edge design, first-rate sound quality and very good power handling. The brushed and electroplated injected polypropylene membrane reveals laser-cut logos. An aluminium bullet phase-plug placed in the centre of the woofer effectively eliminates standing waves. The ultra rigid chassis and the large magnetic system provide very good bass reproduction. The tweeters use a neodymium magnet and an exceptionally dynamic mylar dome with integrated phase lens. The filter is in-line for easy installation. The price is ultra competitive and nothing in the market comes anywhere close to the TX2 Series in terms of price to performance.
Features :
- Injected polypropylene cone with brushed electro-plated finish for a perfect design
- Laser cut logos for a perfect finish
- 13mm Mylar tweeter with phase lens for a perfect sound
- 25mm Aluminium voice coil for a higher power handling
- Rubber suspension for a perfect reliability
- Soft and highly musical sound quality
Specfications
- 2-way coaxial speakers
- Diameter : 16,5cm (6.5")
- Peak Power : 260W
- RMS Power : 65W
- Sensitivity : 92,5dB/2,83v/1m
- Impedance : 4Ω
- Response : 48Hz - 22000Hz
- Mounting Depth : 62,5mm
- Grilles included
Download product user manual here
MTX Audio TX Series 300W 4-Channel Amplifier - TX2450
The MTX TX2450 amplifier is powerful and very flexible. It can power up 4 speakers (2Ω~8Ω) at the front, at the rear. Another example, it can power up the 2 front speakers plus a subwoofer. In any case, it shines with its legendary dynamics and exceptional musicality. The variable active filter allows it to be extremely precise: 12dB/oct high pass or variable low pass from 50 to 120Hz. If you don't know where to start adjusting the active filter, the potentiometer is equipped with an 80Hz "click" position. To avoid interference problems, we have equipped the TX2450 with balanced inputs. They perfectly isolate the audio ground of the amp so that it does not mix with the noisy ground of the power supply. This is a powerful technique that is usually found on high end amps. If your car stereo does not have RCA outputs, you can connect the TX2450 to the high level inputs. All you need to do is connect the factory speaker output cables directly to the high level input of the amplifier. Simple yet very practical.
Also available, matching TX2 1/2 channel amplifier TX275 and TX strappable 500W RMS TX6500D and 1000W RMS TX81000D.
Features :
- Classic Class-AB topology
- Very compact size for an easy installation
- 2Ω stereo and 4Ω bridged compatible
- High quality components
- 12dB/Oct flexible x-over
- Full aluminium construction (excluding end-caps)
- Thermo regulated fan connector (for one or two external fans)
Specifications :
- Class-AB 4-channel amplifier
- CTA2006 certified power
- 4x 50 watts RMS @ 4Ω THD+N ≤1% (60W RMS in testing with SMD / AP)
- 4x 75 watts RMS @ 2Ω THD+N ≤1%
- 2x 150 watts RMS bridged @ 4Ω THD+N ≤1% - Active x-over
- High-pass (HPF) 12dB/Oct variable from 50Hz to 120Hz
- Low-pass (LPF) 12dB/Oct variable from 50Hz to 120Hz - Signal/Noise ratio (1 watt) : >73dB
- THD+Noise (Distortion) (1 watt) : ≤1%
- Frequency response (±1dB) : 20Hz-30000Hz
- Input sensitivity RCA : 200mV to 6V
- Dimensions : 135mm x 220mm x 52mm
- High and low level inputs
Download product user manual here