Furthermore, Output 2 can be configured as either mono or stereo and can send audio signal to a stereo audio system in another room, to a single mono subwoofer, or to 2 separate stereo subwoofers.
RETURN OF THE PROCESSOR LOOP
The C55 features the return of the Processor Loop, something not available on the last few generations of McIntosh preamplifiers. The Processor Loop allows you to insert an external signal processor (such as our MQ112 Environmental Equalizer or MEN220 Room Correction System), dynamic range expanders, or other devices without having to place it between the preamplifier and power amplifier(s). This is usually more convenient and can allow for better performance.
The Processor Loop is also the perfect place to connect an analog tape recorder, a high-end cassette deck, or a 3-head reel deck that allows you to record from a source component and hear the recording just seconds later so you can monitor your recordings.
NETWORK CONNECTED FOR CONTROL AND UPDATES
In addition to using the included remote control or the front panel controls, the C55 can be connected to your network which will unlock control options offered through our complimentary Connect app. Designed for both Android and Apple devices, the Connect app can be used to control key functions of the C55 including Volume control as well as Input and Output selection.
Select McIntosh source components3 that have a data cable connected to the C55 will be partially controllable via the app's Source Control feature. With Source Control, users will be able to control many of the source unit's functions from the app, such as changing radio stations on a tuner, or playing a disc in a CD Player. This feature will bring added convenience to setups that have a secondary set of power amplifiers and speakers connected to one of the C55's outputs, such as an outdoor system where you will no longer be forced to go inside to control its basic functionality.
Another benefit of adding the C55 to your network is the ability to receive periodic firmware updates. These firmware releases can add new features or provide important performance updates. Watch our McIntosh Connect App: Setup and How to Use video to get acquainted with the app.
ADDITIONAL PERFORMANCE FEATURES
- 8-band analog equalizer to fine-tune your music with precision, creating a personalized audio experience (the equalizer can be bypassed if desired).
- High Drive Headphone Amplifier with Headphone Crossfeed Director (HXD®) technology brings an added dimension to headphone listening.
- Home Theater PassThru for seamless integration into your home theater system.
- Has received Roon Tested designation from Roon Labs.
- Power Control lets you easily turn other connected McIntosh components on and off.
- Data Ports can send remote control commands to connected source components.
- Electromagnetic Input Switching for reliable, noiseless, and distortion-free switching.
- Level Trim Adjustment for matching analog input levels to prevent abrupt changes in volume levels.
- Precision balanced, digitally controlled attenuator system for accurate volume control with 0.1dB accuracy.
- Fully regulated power supplies and a special R-core power transformer for stable, noise-free operation.
- Eco-friendly Power Management System that will turn the unit off after 30 minutes of inactivity (can be disabled).
ELEVATE YOUR AUDITORY JOURNEY
All this cutting-edge audio technology resides within the iconic McIntosh design – a black glass front panel adorned with blue meters, rotary knobs, and an illuminated logo. The polished stainless steel chassis adds a touch of elegance, making it a perfect companion for amplifiers, CD players, turntables, and more.
Elevate your sound journey with the C55 Preamplifier.
Electronic Specifications
-
- Number of Channels
- 2
-
- Total Harmonic Distortion
- 0.005%
-
- Frequency Response
- +0, -0.5dB from 20Hz to 20kHz
+0, -3dB from 15Hz to 100kHz
-
- Maximum Volts Out (Balanced / Unbalanced)
- 16V RMS / 8V RMS
-
- Sensitivity High Level (Balanced / Unbalanced)
- 900mV / 450mV
-
- Sensitivity Phono (Moving Coil)
- 0.45mV
-
- Sensitivity Phono (Moving Magnet)
- 4.5mV
-
- Signal To Noise Ratio (High Level)
- 100dB
-
- Signal To Noise Ratio (Moving Coil)
- 80dB
-
- Signal To Noise Ratio (Moving Magnet)
- 82dB
-
- Voltage Gain (High Level)
- 15dB
-
- Voltage Gain (Moving Coil)
- Selectable 40dB, 46dB, 52dB, 58dB, or 64dB
-
- Voltage Gain (Moving Magnet)
- Selectable 40dB, 46dB, 52dB, 58dB, or 64dB
-
- Input Impedance (Balanced / Unbalanced)
- 44K ohm, 22K ohm
Connectivity
-
- Balanced Input
- 3
-
- Unbalanced Input
- 4
-
- Phono Input Moving Coil
- Up to 2 (unit has 2 Phono inputs; each is user configurable as either Moving Coil or Moving Magnet)
-
- Phono Input Moving Magnet
- Up to 2 (unit has 2 Phono inputs; each is user configurable as either Moving Coil or Moving Magnet)
-
- Upgradeable Digital Audio Module
- Yes: DA2
-
- Digital Coaxial Input
- 2
-
- Digital Optical Input
- 2
-
- Digital MCT Input
- 1
-
- Digital USB Input
- 1
-
- HDMI (ARC) Input
- 1
-
- Digital AES/EBU Input
- 0
-
- Balanced Fixed Output
- 0
-
- Balanced Variable Output
- 3
-
- Unbalanced Fixed Output
- 0
-
- Unbalanced Variable Output
- 3
-
- Headphone Output
- 1/4" High Drive with Headphone Crossfeed Director (HXD®)
-
- Input Level Match
- Yes, +/- 6dB
-
- Home Theater PassThru
- Yes
-
- Unbalanced Analog Connector Type
- Premium gold-plated solid brass
-
- Service Port
- 1
-
- Network Connection
- 1
Control
-
- Tone Controls
- 8-band (each band adjustable ± 12dB )
-
- Tone Bypass and Input Assign
- Yes
-
- RS232 Control Input
- Yes
-
- Power Control Output
- 1 Main, 4 Trigger
-
- Rear Panel Data Port
- 6
-
- Rear Panel IR Sensor Input
- Yes
General Specifications
-
- Multi-Chassis or Single
- Single, two-layer
-
- Output Meters
- Yes
-
- Vacuum Tube or Solid State
- Solid State
-
- Power Consumption (On)
- 75 Watts
Weights & Dimensions
-
- Unit Dimensions (W x H x D)
- 17.5" (44.45cm) x 7.625" (19.4cm) x 16.5" (41.9cm)
-
- Unit Weight
- 28 lbs (12.5 kg)
-
- Shipping Weight
- 43.5 lbs (19.7 kg)
