Fyne Audio + Rega Hi-Fi Package – SoundHub

Fyne Audio + Rega Hi-Fi Package

  • Sale
  • Regular price $17,999.00
Tax included.


FYNE AUDIO F502SP FLOORSTANDING SPEAKERS

Improving on the F502, the UK built SP edition uses the premium 200mm (8″) IsoFlareTM driver and 200mm (8″) bass/mid driver from the F702, featuring rigid multi-fibre cones and FyneFluteTM roll surrounds. The IsoFlare’s 25mm magnesium compression tweeter has a unique HF wave guide pole piece delivering an incredibly even, full-range frequency response and outstanding musical imaging. The F502SP also benefits from the F700’s advanced crossover components and aluminium sandwich type plinth with BassTrax tractrix profile bass diffuser, re-engineered to precisely tune the F502SP’s more compact cabinet. The SP is available in high-gloss black and high gloss white as standard, or in a new, luxurious deep gloss lacquered walnut veneer with diamond machine cut finish on the aluminium chassis.

SPECIFICATIONS

  • System Type 2 1⁄2 way, downwards firing port, with BassTraxTM Tractrix diffuser*, twin cavity loading system
  • Recommended amplifier 30w – 200w
  • Continuous power 100 handling (Watt RMS)
  • Peak power handling 400 (Watt RMS)
  • Sensitivity (2.83 Volt @ 1m) 92dB
  • Nominal impedance 8 Ohm
  • Frequency response 30Hz- 34kHz (-6dB typical in room)
  • Drive unit complement 1 x 200mm IsoFlareTM point source driver, multi-fibre bass/ midrange cone, FyneFluteTM surround with 25mm magnesium dome compression tweeter, neodymium magnet system
  • 1 x 200mm multi-fibre bass/ midrange cone, FyneFluteTM surround
  • Crossover frequency 250Hz & 1.7kHz
  • Crossover type Bi-wired passive low loss, 2nd order low pass, 1st order high pass
  • Cabinet construction High density fibre board with extensive internal bracing
  • Dimensions – HxWxD 1110 x 338 x 380mm incl. plinth, terminals & grille

REGA AETHOS

The Aethos stereo amplifier is housed in a brand new, custom designed case. Employing four 160 W 16 Amp output transistors per channel, this delivers 156 W per channel into 6 Ω. The Aethos is a dual mono design using a custom wound toroidal transformer and regulated supplies for the sensitive amplification and driver stages. The pre-amplifier stage uses class-A discrete circuitry throughout. The Aethos is a no compromise product with one goal, to deliver your music as faithfully as possible.

Design Innovation

Our time, effort and money have been spent on developing the circuit and construction, utilizing the highest specification of components throughout. As part of the design we have included useful features such as the switchable direct input and preamplifier output, to enable the new Aethos amplifier to be used in a wide combination of systems. The headphone socket has been integrated such that the speaker switching is performed by the output mute relay as so not to obstruct the signal path and degrade the sound quality.

We have taken the design concepts underpinning the multi award winning and hugely successful Elex-R and Elicit-R and propelled the performance to the next level and beyond with a 125watt dual mono design with features such as fully discrete FET based line amplifier, polypropylene capacitors throughout the signal path, K-Power reservoir capacitors, power amplifier regulated supply and a high current output stage comprising of four 160w Sanken output transistors per channel.

KEY FEATURES

  • 156 W per channel into 6 Ω (125 W per channel into 8 Ω)
  • Dual mono design
  • 5 Line inputs
  • Headphone socket
  • Remote control
  • Direct input
  • Record out
  • Pre-amp out
  • Lifetime warranty against manufacture defects

TECHNICAL SPECIFICATIONS

Power Outputs at Rated 230/115 V Supply Voltage

125 W RMS both channels driven into the rated load of 8 Ω

156 W RMS both channels driven into 6 Ω

Record Output

Record output level (with rated input levels) 219 mV

Record output impedance 560 Ω

Pre-amp Output

Pre-amp output level (with rated input levels) 840 mV

Pre-amp output impedance 100 Ω

Dimensions (W x H x D)

433 95 360 mm (including speaker terminals)

Weight

17.5 kg